Shopping Cart
The tiller bracket is one of the two parts of the innovative 2-part mounting bracket – the part that is attached to the outboard. The Innovative 2-part RemigoOne mounting system offers standard mounting dimensions anywhere between 15 and 23 inch of height (S to XL shaft length equivalent). Thanks to the stepless shaft length adjustment you will be able to find the precise position for reaching outboard’s maximum performance and most importantly – you will be able to use the same outboard on different type of vessels.
$299.00
Spare tiller bracket for mounting RemigoOne electric outboard motor to your boat’s rear. One small, aesthetic 1000w electric outboard that fits to any small boat and mounting height!
The tiller bracket is one of the two parts of the innovative RemigoOne 2-part mounting bracket. It attaches the outboard to the transom bracket, while the transom bracket attaches the whole unit to the transom of your boat.
The tiller combines different functions in 3 positions. To switch between those, perform a pump-action; pull the black handle at the end of the tiller, away from the outboard.
The Innovative 2-part RemigoOne mounting system offers secure operation during mounting and use. The ultimate goal when constructing the bracket was detaching the outboard from the mounting part and this is the result: first console mounting system for an outboard in the world! This means you can leave the bracket always on your boat while taking the outboard off for charging or for safety reasons (theft)!
And it is truly a one size fits all electric outboard: it combines standard mounting dimensions between 15 and 23 inch of height (S to XL shaft length equivalent). Thanks to the stepless shaft length adjustment you will be able to find the precise position for reaching outboard’s maximum performance, but most importantly – you will be able to use the same outboard on different type of vessels. A dinghy, custom wooden fishing boat or a small sailboat by simply loosening 3 screws and adjusting the height!
Materials
Built out of the best materials: stainless steel and marine grade aluminium, combining strength and low weight where needed. Fully protected against galvanic corrosion.
Important note: Tiller Bracket is already included in the package when you order RemigoOne electric outboard motor.
Everything you need to know about Remigo electric outboard motors.
Battery runtime depends on your usage and which model you choose. With the RemigoOne Neo, you can expect 2-4 hours of runtime at cruising speed on a single charge. The RemigoOne offers 3-6 hours depending on conditions. Boost mode on the Neo will reduce runtime but delivers maximum power when you need it. Actual range varies based on boat weight, water conditions, and speed settings.
Absolutely. All Remigo motors are built with marine-grade materials designed specifically for saltwater environments. The sealed electronics, corrosion-resistant components, and waterproof construction ensure reliable performance in both freshwater and saltwater conditions. We recommend rinsing with freshwater after saltwater use to maximize longevity.
Using a standard household outlet (110V), a full charge takes approximately 4-6 hours. With a 220V connection, you can cut that time roughly in half. The battery management system prevents overcharging, so you can leave it plugged in overnight without worry. We also offer fast-charging accessories for even quicker turnaround times.
The RemigoOne Neo is our latest model featuring Boost Mode for on-demand power bursts, upgraded battery capacity, and enhanced torque for heavier loads. The original RemigoOne remains an excellent choice for lighter tenders and dinghies. Both are silent, zero-emission, and maintenance-free. Neo is ideal if you need extra power or are running a heavier boat.
No winterization required. Unlike gas outboards, Remigo motors need virtually no maintenance. There’s no engine oil to change, no spark plugs to replace, no fuel system to clean, and no winterizing procedures. Simply rinse after use, store in a dry place, and keep the battery charged during long storage periods. That’s it.
Remigo motors are designed for tenders, dinghies, small sailboats, kayaks, canoes, and inflatable boats typically up to 14-16 feet and 800-1200 lbs. They’re perfect for yacht tenders, fishing skiffs, sailing auxiliaries, and exploring shallow waters. If you’re unsure about your specific boat, our team can provide guidance based on your hull type, weight, and intended use.
Yes. You’ll hear a gentle hum from the propeller moving through water, but there’s no engine noise, no exhaust sound, and no vibration. It’s quiet enough to have a normal conversation, hear birds and wildlife, and avoid disturbing anchorages or fishing spots. Many users say it’s the single biggest quality-of-life improvement over traditional outboards.
Every Remigo motor comes with the motor unit, integrated battery, charger, tiller handle (or remote control on select models), mounting hardware, and a full manufacturer warranty. You’ll also get access to our direct customer support team, installation guidance, and online resources. Everything you need to get on the water is in the box.
Yes. Remigo motors are designed to be portable. The compact size and integrated battery make them easy to transport in RVs, truck beds, or vehicle storage. The battery complies with transportation regulations for lithium-ion batteries. Many RV travelers and road-trippers choose Remigo specifically for this portability and the ability to charge from their RV electrical system.
All Remigo motors include a comprehensive manufacturer warranty covering defects in materials and workmanship. When you buy direct from Remigo North America, you get priority support from the team that builds and services the motors. No middlemen, no waiting for answers. Warranty claims, technical support, and parts are all handled directly by our US-based team with fast turnaround times.
